Your tools are your most valuable asset. They are what make doing your job possible. Effective power tool maintenance is the key to making those tools last and protecting your investment. Most tool maintenance practices are very simple, easy habits that you can apply daily.
Overworking a tool puts a lot of stress on its motor and can cause it to overheat. This mostly happens when you are trying to work through a difficult material, like drilling into concrete or sawing a very hard wood. Overheating can also occur if you run a tool too long without stopping. If your tool seems like it is getting hot, stop what you are doing and give it a break until it can cool down. This will help save you from wearing out the motor or burning out parts.
For your best tool maintenance, power tools should be cleaned at the end of every shift and before they are stored away for the night. You can wipe dirt and other particles from the outside casing with a good cleaning cloth. Compressed air is the best option to clean the particles from the tool’s vents; cleaning your tool’s exhaust vents with a brush could push the dirt farther into the tool and inadvertently cause more damage later.
Lubrication is a must to keep all the moving parts on your power tools working properly. Check the tool maintenance section of your owner’s manual and follow the manufacturer’s instructions on how to correctly lubricate your tool’s model and which lubricant to use. Keeping your tool well-lubed keeps the parts from chafing, heating and corroding.
Using old and worn-out drill bits or saw blades means you have to work your power tool even harder to get the job done. This causes extra stress on the motor which can damage parts or cause the tool to overheat with stress. Likewise, it is also important to make sure you are using the right bit for the material you are working
Power tools are precision instruments. They use a lot of moving parts that need to remain in alignment. The tool maintenance schedule in your user’s manual will outline when a tool should be recalibrated, usually after a specified amount of use hours. Most tool companies offer calibration services for their products.
Power tools need to be stored in a dry, clean place. Storing power tools in a moist environment can lead to problems with the electrical components and cause corrosion. This can cause safety issues or cause your tool to stop working completely. Tools also should be stored inside a case or cabinet when not in use. This helps eliminate excess dust and particles getting into the tools through the vents when not in use.
As your tool gets used, some parts will eventually need to be replaced. One of the most common replacements is the tool’s carbon brushes, which are responsible for conducting electricity through the motor. If your tool has a drive belt, like in a belt sander or some power saws, monitor it for wear and replace worn drive belts before they snap. Power cords and switch assemblies are also parts that tend to become damaged over time and are known for needing replacements.
Lithium-ion batteries are the current standard for power tools. One of the most important factors to keeping your lithium-ion battery well maintained is to manage heat. Allowing a battery to overheat can fry it beyond repair. Store your batteries in a climate-controlled area and avoid leaving it in places where the temperature spikes (such as in the back of an enclosed truck). Do not let the battery run completely down before recharging it.
Implementing daily maintenance routines is the best way to prevent problems with your power tools. A simple dusting can remove dirt and particles that could otherwise end up in your gears or start corroding your electrical system. Keeping your tools clean, cool and effectively oiled is a sure way to get the most out of them.
The information contained in this article is intended for general information purposes only and is based on information available as of the initial date of publication. No representation is made that the information or references are complete or remain current. This article is not a substitute for review of current applicable government regulations, industry standards, or other standards specific to your business and/or activities and should not be construed as legal advice or opinion. Readers with specific questions should refer to the applicable standards or consult with an attorney.
SIGN UP FOR EMAIL
Get more great content like this sent to your inbox.
THE PRODUCTS YOU NEED,
WHEN YOU NEED THEM